Menu
SMALL FOOTPRINT ARRAYS
small contact area arrays
ADP Transducers
Wedges
Technology & Features
Resources
ADP Transducers
Part Numbers
| Case | Frequency (MHz) | Number of Elements | Element Pitch | Element Elevation | Part Number | ||
|---|---|---|---|---|---|---|---|
| Inch | mm | Inch | mm | GP* | |||
| A0 | 5 | 16 | 0.016 | 0.40 | 0.25 | 6.4 | 00-011275 |
| 10 | 16 | 0.016 | 0.40 | 0.25 | 6.4 | 00-013027 | |
| A00 | 10 | 16 | 0.012 | 0.31 | 0.20 | 5 | 00-010341 |
| 0.25″ MSWS | 3.5 | 16 | 0.016 | 0.40 | 0.25 | 6.4 | 00-010379 |
| 5 | 16 | 0.016 | 0.40 | 0.25 | 6.4 | 00-010380 | |
| 7.5 | 16 | 0.016 | 0.40 | 0.25 | 6.4 | 00-010867 | |
| 10 | 16 | 0.016 | 0.40 | 0.25 | 6.4 | 00-011207 | |
| 0.50″ MSWS | 2.25 | 32 | 0.016 | 0.40 | 0.50 | 12.7 | 00-010340 |
| 3.5 | 32 | 0.016 | 0.40 | 0.50 | 12.7 | 00-010381 | |
| 5 | 32 | 0.016 | 0.40 | 0.50 | 12.7 | 00-010339 | |
| 10 | 32 | 0.016 | 0.40 | 0.50 | 12.7 | 00-010338 |
Case Dimensions
| Case Type | Case Dimensions | |||||
|---|---|---|---|---|---|---|
| Length | Width | Height | ||||
| A0 | 0.41 in. | 10.3 mm | 0.5 in. | 12.6 mm | 0.91 in. | 23.1 mm |
| A00 | 0.31 in. | 7.9 mm | 0.31 in. | 7.9 mm | 0.91 in. | 23.1 mm |
| 0.25″ MSWS | 0.5 in. | 12.7 mm | 0.37 in. | 9.4 mm | 0.5 in. | 12.7 mm |
| 0.5″ MSWS | 0.76 in. | 19.3 mm | 0.61 in. | 15.5 mm | 0.75 in. | 19 mm |
Wedges
| Case | Description | Part Number | Dimensions | |||||
|---|---|---|---|---|---|---|---|---|
| Length | Width | Height | ||||||
| A00 | 30-60 Shear | 01-010710 | 0.83 in. | 21.1 mm | 0.55 in. | 14 mm | 0.47 in. | 11.9 mm |
| A00 | 30-60 Shear | 01-010711 | 0.83 in. | 21.1 mm | 0.55 in. | 14 mm | 0.51 in. | 13 mm |
| 0.25″ MSWS | 35-75 Shear, Flat | 01-010705 | 0.75 in. | 19 mm | 0.70 in. | 17.8 mm | 0.38 in. | 9.7 mm |
| 0.25″ MSWS | 35-75 L-Wave, Flat | 01-010977 | 0.58 in. | 14.7 mm | 0.70 in. | 17.8 mm | 0.28 in. | 7.1 mm |
| 0.5″ MSWS | 35-75 Shear, Flat | 01-011015 | 1.20 in. | 30.5 mm | 0.95 in. | 24.1 mm | 0.70 in. | 17.8 mm |
| 0.5″ MSWS | 35-75 L-Wave, Flat | 01-011016 | 0.81 in. | 20.6 mm | 0.95 in. | 24.1 mm | 0.35 in. | 8.9 mm |
Technology & Features
ABFP Transducers
Small footprint arrays are designed with small contact area for inspections in tight or confined spaces. They can be used for a large variety of inspections including welds, tubes, and pipes, aircraft components, tanks and vessels, and more. Customizations to arrays and wedges can be special ordered to further optimize your inspection requirements.
Typical Applications
- Weld Inspection
- Tubes and Pipes
- Aircraft Components
- Tanks and Vessels
About Linear Arrays
The linear array is the most common form factor used in industrial phased array testing including TFM/FMC applications. The linear array allows electronic control of the active plane of the transducer including steering angle, depth of focus, and position of the sound beam.
- A single element in the array. In this graphic, 1 of 16 elements.
- Width of a single element.
- Space between adjacent elements.
- Array Pitch; the distance between the center points of two adjacent elements. Pitch controls the arrays resolution and steering ability.
- Array Elevation; the length of the elements.
Resources
