GENERAL PURPOSE LINEAR
PHASED-ARRAY TRANSDUCERS
Array Transducers
Wedges
Technology & Features
Resources
Array Transducers
Part Numbers
| Case | Frequency (MHz) | Number of Elements | Element Pitch | Element Elevation | Part Number | ||
|---|---|---|---|---|---|---|---|
| Inch | mm | Inch | mm | GP* | |||
| A1 | 2.25 | 16 | 0.030 | 0.75 | 0.47 | 12 | 00-011419 |
| 5 | 16 | 0.024 | 0.60 | 0.39 | 10 | 00-011423 | |
| 10 | 32 | 0.012 | 0.31 | 0.28 | 7 | 00-011430 | |
| A2 | 5 | 64 | 0.024 | 0.60 | 0.39 | 10 | 00-011427 |
| 10 | 64 | 0.024 | 0.60 | 0.28 | 7 | 00-013041 | |
| A3 | 5 | 16 | 0.047 | 1.20 | 0.47 | 12 | 00-011926 |
| A10 | 2.25 | 8 | 0.047 | 1.2 | 0.39 | 10 | 00-013030 |
| 3.5 | 8 | 0.047 | 1.2 | 0.39 | 10 | 00-013031 | |
| 5 | 16 | 0.024 | 0.60 | 0.39 | 10 | 00-011422 | |
| 5 | 32 | 0.012 | 0.30 | 0.39 | 10 | 00-011651 | |
| 7.5 | 32 | 0.012 | 0.30 | 0.39 | 10 | 00-013028 | |
| 10 | 32 | 0.012 | 0.30 | 0.28 | 7 | 00-011429 | |
| A11 | 2.25 | 32 | 0.024 | 0.60 | 0.39 | 10 | 00-011781 |
| 5 | 16 | 0.040 | 1.00 | 0.39 | 10 | 00-011836 | |
| 5 | 32 | 0.024 | 0.60 | 0.39 | 10 | 00-010329 | |
| 5 | 64 | 0.012 | 0.30 | 0.39 | 10 | 00-013036 | |
| 10 | 64 | 0.012 | 0.30 | 0.39 | 10 | 00-013037 | |
| 15 | 64 | 0.012 | 0.30 | 0.39 | 10 | 00-013038 | |
| A12 | 2.25 | 64 | 0.024 | 0.60 | 0.39 | 10 | 00-011420 |
| 2.25 | 64 | 0.030 | 0.75 | 0.47 | 12 | 00-011421 | |
| 3.5 | 64 | 0.024 | 0.70 | 0.39 | 10 | 00-012459 | |
| 5 | 64 | 0.024 | 0.70 | 0.39 | 10 | 00-011426 | |
| 5 | 128 | 0.012 | 0.30 | 0.39 | 10 | 00-013040 | |
| 10 | 64 | 0.024 | 0.60 | 0.39 | 10 | 00-013039 | |
| AM | 2.25 | 16 | 0.030 | 0.75 | 0.47 | 12 | 00-010265 |
| 5 | 16 | 0.024 | 0.60 | 0.39 | 10 | 00-010266 | |
| E1 | 4 | 16 | 0.020 | 0.50 | 0.35 | 9 | 00-010275 |
| E2 | 1.5 | 16 | 0.040 | 1.00 | 0.47 | 12 | 00-010276 |
| E3 | 2.25 | 16 | 0.060 | 1.50 | 0.75 | 19 | 00-010277 |
| LM | 2.25 | 64 | 0.024 | 0.60 | 0.39 | 10 | 00-010267 |
| 5 | 64 | 0.024 | 0.60 | 0.39 | 10 | 00-010268 | |
| 10 | 64 | 0.024 | 0.60 | 0.39 | 10 | 00-010269 |
Case Dimensions
| Case Type | Case Dimensions | |||||
|---|---|---|---|---|---|---|
| Length | Width | Height | ||||
| A1 | 0.67 in. | 17 mm | 1.09 in. | 27.7 mm | 0.99 in. | 25.1 mm |
| A2 | 2.09 in. | 53.1 mm | 1.14 in. | 29 mm | 1.36 in. | 34.5 mm |
| A10 | 0.91 in. | 23.1 mm | 0.63 in. | 16 mm | 0.79 in. | 20.1 mm |
| A11 | 0.98 in. | 24.9 mm | 0.91 in. | 23.1 mm | 0.79 in. | 20.1 mm |
| A12 | 1.77 in. | 45 mm | 0.91 in. | 23.1 mm | 0.79 in. | 20.1 mm |
| E1 | 1.1 in. | 27.9 mm | 0.59 in. | 15 mm | 1.06 in. | 26.9 mm |
| E2 | 0.75 in. | 19 mm | 0.75 in. | 19 mm | 1.0 in. | 25.4 mm |
| E3 | 1.45 in. | 36.8 mm | 1.25 in. | 31.8 mm | 1.0 in. | 25.4 mm |
| AM | 1.18 in. | 30 mm | 0.63 in. | 16 mm | 0.98 in. | 24.9 mm |
| LM | 1.69 in. | 42.9 mm | 1.1 in. | 27.9 mm | 0.98 in. | 24.9 mm |
Wedges
| Case | Description | Part Number | Dimensions | |||||
|---|---|---|---|---|---|---|---|---|
| Length | Width | Height | ||||||
| A1 | 0 Degree Delay, 20mm | 01-011733 | 1.14 in. | 29 mm | 1.18 in. | 30 mm | 0.79 in. | 20 mm |
| N60S (45-70 Shear), porting, wear pins, 8mm gimbal holes | 01-011734-IHC | 1.20 in. | 30.5 mm | 1.58 in. | 40.1 mm | 0.64 in. | 16.3 mm | |
| A2 | 0 Degree Delay, 20mm | 01-011741 | 2.56 in. | 65 mm | 1.18 in. | 40 mm | 0.79 in. | 20 mm |
| N55S (30-70 Shear), porting, wear pins, 8mm gimbal holes | 01-011742-IHC | 2.70 in. | 68.6 mm | 1.58 in. | 40.1 mm | 1.70 in. | 43.2 mm | |
| A10 | 0 Degree Delay, 20mm | 01-011735 | 0.98 in. | 24.9 mm | 0.91 in. | 23.1 mm | 0.79 in. | 20 mm |
| N55S (30-70 Shear) | 01-010944 | 0.91 in. | 23.1 mm | 0.91 in. | 23.1 mm | 0.56 in. | 16.5 mm | |
| 30-70 Shear with Built-in IHC | 01-010944-P | Contact for details on sizing | ||||||
| IHC Ring, ported wedge ring with wear pins | 01-011514 | Contact for details on sizing | ||||||
| A11 | 0 Degree Delay, 20mm | 01-011749 | 1.28 in. | 35.1 mm | 0.91 in. | 23.1 mm | 0.91 in. | 23.1 mm |
| 30-70 Shear | 01-010709 | 1.63 in. | 41.4 mm | 0.91 in. | 23.1 mm | 1.13 in. | 28.7 mm | |
| 30-70 Shear with built-in IHC | 01-010709-P | Contact for details on sizing | ||||||
| IHC Ring, ported wedge ring with wear pins | 01-012303 | Contact for details on sizing | ||||||
| A12 | 0 Degree Delay, 20mm | 01-011737 | 2.28 in. | 57.9 mm | 0.91 in. | 23.1 mm | 0.76 in. | 20 mm |
| 30-70 Shear | 01-011738 | 2.88 in. | 73.2 mm | 0.91 in. | 23.1 mm | 1.76 in. | 44.7 mm | |
| 30-70 Shear with built-in IHC | 01-011738-P | Contact for details on sizing | ||||||
| IHC Ring, ported wedge ring with wear pins | 01-012315 | Contact for details on sizing | ||||||
| E1 | REX, 38.0 DEG INC, Flat, A | 01-010293 | 0.75 in. | 19.1 mm | 1.10 in. | 27.9 mm | 0.60 in. | 15.2 mm |
| REX, 38.0 DEG INC, Flat, B | 01-010294 | 0.65 in. | 16.5 mm | 1.10 in. | 27.9 mm | 0.60 in. | 15.2 mm | |
| 30-70 Shear | 01-011731 | 0.97 in. | 24.6 mm | 1.11 in. | 28.2 mm | 0.59 in. | 15 mm | |
| E2 | REX, 38.0 DEG INC, Flat, A | 01-010295 | 1.12 in. | 28.4 mm | 0.82 in. | 20.8 mm | 0.82 in. | 20.8 mm |
| REX, 38.0 DEG INC, Flat, B | 01-010296 | 0.77 in. | 19.6 mm | 0.82 in. | 20.8 mm | 0.82 in. | 20.8 mm | |
| E3 | REX, 38.0 DEG INC, Flat | 01-010297 | 1.83 in. | 64.5 mm | 1.50 in. | 38.1 mm | 1.29 in. | 32.8 mm |
| AM | 0 Degree Delay, 20mm | 01-011975 | 1.25 in. | 31.8 mm | 1.18 in. | 30 mm | 0.79 in. | 20 mm |
| 40-70S | 01-010703 | 0.93 in. | 23.6 mm | 1.18 in. | 30 mm | 0.47 in. | 11.9 mm | |
| 40-70L | 01-010531 | 0.98 in. | 24.9 mm | 1.18 in. | 30 mm | 0.92 in. | 23.4 mm | |
| LM | 0 Degree | 01-010706 | 2.00 in. | 50.8 mm | 1.10 in. | 27.9 mm | 0.79 in. | 20.1 mm |
| 40-70S | 01-010707 | 2.60 in. | 66 mm | 1.10 in. | 27.9 mm | 1.35 in. | 34.3 mm | |
| 40-70L | 01-010708 | 2.27 in. | 57.7 mm | 1.10 in. | 27.9 mm | 1.40 in. | 35.6 mm |
Technology & Features
General Purpose Linear Arrays
General purpose linear arrays are versatile arrays that optimize a wide range of applications including weld inspection, tube and pipe inspection, turbine blade, rails, pressure vessels, and many more. Varying in frequency, number of elements, and element pitch and elevation, the wide variety of arrays available provide many options when choosing an array for your application. Custom options are available upon request.
Typical Applications
- Weld Inspection
- Tubes and Pipes
- Pressure Vessels
- Turbine Blades
- Rails
About Linear Arrays
The linear array is the most common form factor used in industrial phased array testing including TFM/FMC applications. The linear array allows electronic control of the active plane of the transducer including steering angle, depth of focus, and position of the sound beam.
- A single element in the array. In this graphic, 1 of 16 elements.
- Width of a single element.
- Space between adjacent elements.
- Array Pitch; the distance between the center points of two adjacent elements. Pitch controls the arrays resolution and steering ability.
- Array Elevation; the length of the elements.
Resources
