Dual-Linear
Dual-Linear Phased Arrays
Dual-Linear Arrays
Technology & Features
Resources
Dual-Linear Arrays
Part Numbers
| Case | Frequency (MHz) | Number of Elements | Element Pitch | Elevation | Part Number | Cable Length | ||
|---|---|---|---|---|---|---|---|---|
| Inch | mm | Inch | mm | |||||
| CL | 5 | 32 Transmit | 0.060 | 1.50 | 0.20 | 5 | 00-010863 | 3.0M (9.8 ft.) |
| 32 Receive | ||||||||
| CS | 5 | 32 Transmit | 0.030 | 0.75 | 0.20 | 5 | 00-011200 | 3.0M (9.8 ft.) |
| 32 Receive | ||||||||
| CS | 10 | 64 Transmit | 0.014 | 0.35 | 0.20 | 5 | 00-012676 | 3.0M (9.8 ft.) |
| 64 Receive | ||||||||
| Removable Delay | 7.5 | 32 Transmit | 0.060 | 1.50 | 0.20 | 5 | 00-013062 | 2.5M (8.2 ft.) |
| 32 Receive |
Case Dimensions
| Case Type | Case Dimensions | |||||
|---|---|---|---|---|---|---|
| Width | Length | Height | ||||
| CL | 0.95 in. | 24.1 mm | 2.58 in. | 65.5 mm | 1.0 in. | 25.4 mm |
| CS | 0.95 in. | 24.1 mm | 1.61 in. | 40.9 mm | 1.0 in. | 25.4 mm |
| Removable | 1.25 in. | 31.8 mm | 2.58 in. | 65.5 mm | 1.20 in. | 30.5 mm |
Wear Bars
| Case Type | Description | Part Number |
|---|---|---|
| CS | Ported Wear Plate, Flat, Porting | 01-011541 |
| CL | Ported Wear Plate, Flat, Porting | 01-011430 |
| Removable | Removable Sled, 3mm (0.12″) gimbal holes | 01-011541 |
Technology & Features
Dual-Linear Arrays
Dual-Linear Phased Array transducers are optimized for corrosion and erosion inspection up to 100°C (212°F). All models provide 32 or more transmit/receive elements that provide larger beam coverage than conventional dual-element transducers allowing for more efficient inspection time. These arrays also provide increased POD for pits in corrosion applications. Replaceable wear plates can be curved to match pipe diameters.
Typical Applications
- Corrosion and Erosion Inspection
- Pit Detection in Corrosion Applications
About Linear Arrays
The linear array is the most common form factor used in industrial phased array testing including TFM/FMC applications. The linear array allows electronic control of the active plane of the transducer including steering angle, depth of focus, and position of the sound beam.
- A single element in the array. In this graphic, 1 of 16 elements.
- Width of a single element.
- Space between adjacent elements.
- Array Pitch; the distance between the center points of two adjacent elements. Pitch controls the arrays resolution and steering ability.
- Array Elevation; the length of the elements.
Resources
